Deleting All Cid Records 5; Answering System Operation; Message Counter Indicator 5 - GE 7 User Manual

Deleting All CID Records
1. Make sure the phone is OFF (not in TALK mode).
. Use the CALLER ID-VOLUME ( 6 or 5) button to display any Caller ID record.
. Press and hold the delete/intercom/conf button until DELETE ALL? shows in the
display.
. Press delete/intercom/conf button to erase all of the current CID records. The
display shows DELETED followed by NO CALLS.
NOTE: Press the END/cancel button to return to the standby mode
without deleting any CID records.

Answering System Operation

This section discusses the buttons and features on the answering system.
Message Counter Indicator
The message counter gives you a numeric display of how many messages you have.
The new message indicator flashes to indicate you have new messages. See below
for the details.
a) Message counter has a number displayed without flashing - No new messages.
Shows total number of old messages.
b) Message counter has a flashing number displayed - There are new messages.
Shows total number of old and new messages.
c) Message counter has bars ( - - ) - Answerer is off.
d) Message counter has an "F" flashing on the display - Memory is full.
e) Message counter has a "CL" flashing on the display - Clock is not set since power
up or after power failure.
f) Message counter has six horizontal bars flashing on the display - MEMO
recording.
g) Message counter has a "An" flashing on the display - Answering incoming calls
and recording an incoming call.
h) Message counter has "LA" - The answering system is being accessed remotely.
NOTE: While the messages are playing, the message counter will
display the messages in the order they were received.
5