Hitachi DK23CA-10 - 10 GB Hard Drive Specifications page 43

Word
93 Hardware reset result
Bit 15
Bit 14
Bit 13
Bit 12 - 8
Bit 7 - 0
94-126 Reserved
K6602637
Rev.3
02.27.01
Table 6.5 Identify Device Information (
Description
0 (fixed)
1 (fixed)
1 = Device detected CBLID- above V
0 = Device detected CBLID- below V
Device 1 hardware reset result. Device 1 clears these bits to zero.
Device 1 sets these bits as follows:
Bit 12 0 = Reserved
Bit 11 1 = Device 1 asserted PDIAG-
Bit 10 - 9 These bits indicate how Device 1 determined the
device number:
00, 11 = Reserved
01 = A jumper was used
10 = the CSEL signal was used
Bit 8 1 (fixed)
Device 0 hardware reset result. Device 1 clears these bits to zero.
Device 0 sets these bits as follows:
Bit 7 0 = Reserved
Bit 6 1 = Device 0 responds when Device 1 is selected
Bit 5 1 = Device 0 detected the assertion of DASP-
Bit 4 1 = Device 0 detected the assertion of PDIAG0
Bit 3 1 = Device 0 passed diagnostic
Bit 2 - 1 These bits indicate how Device 0 determined the
device number:
00, 11 = Reserved
01 = A jumper was used
10 = the CSEL signal was used
Bit 0 1 (fixed)
Continued)
iH
iL
- 43 -
Value
(HEX.)
XXXXh
0000h