Specfications - Echo Power Edger Operator's Manual

30
S
PECIFICATIONS
MODEL ----------------------------------------------------- SRM-210
Length ------------------------------------------------------- 1770 mm (69.7 in.)
Width -------------------------------------------------------- 250 mm (9.84 in.)
Height ------------------------------------------------------- 325 mm (12.8 in.)
Weight (dry) w/cutter head ------------------------------- 4.8 kg (10.7 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust ------------------------------------------------------ Spark Arrestor Muffler
Carburetor -------------------------------------------------- Zama model w/purge pump
Ignition System -------------------------------------------- Flywheel magneto, capacitor discharge ignition type
Spark Plug -------------------------------------------------- NGK BPM-8Y Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be
Oil ------------------------------------------------------------ Power Blend
Fuel Tank Capacity ---------------------------------------- 0.45 lit. (15.2 US fl. oz.)
Recoil Starter System -------------------------------------- i-30 Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Drive Shaft -------------------------------------------------- 1/4 in. Flex Shaft
Rotating Direction ----------------------------------------- Counter-Clockwise viewed from top
Cutter Head ------------------------------------------------- Nylon line head (2-line) with .095 Crossfire™ Line capacity
Handle ------------------------------------------------------- Front - Loop and Right Rear Handle w/rubber grips
Shoulder Harness ------------------------------------------ Optional
Idle Speed --------------------------------------------------- 2,750 - 3,250 RPM
Clutch Engagement Speed -------------------------------- 3,600 - 4,200 RPM
Wide Open Throttle Speed (W.O.T.) -------------------- 8,000 - 10,000 RPM
good quality. Gasoline may contain up to 10% Ethanol (grain
alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline
containing methanol (wood alcohol) is NOT approved.
TM
Premium Universal 2-Stroke Oil
6m (20 ft.)