Bridge Surface Unit; Dual Surface Unit - GE Monogram ZEU769 Owner's Manual

Using the
bridge
surface unit
Using the
dual surface
unit
10
Make sure the pan rests flat on the glass cooktop.
When the select knob points to
CONTROL knob controls both the left front
surface unit and the bridge area.
Choose pans that match the circle/bridge area
as closely as possible.
When the select knob points to
CONTROL knob controls the left front
surface unit only.
NOTE: You can create an oblong heated area by using
the left rear unit in addition to the front unit bridge
combination.
The right front surface unit has 2 cooking sizes to
select from so you can match the size of the unit to the
size of the cookware you are using.
To use the large (9-inch) surface unit, turn the
selector knob clockwise to
turn the control knob to the desired setting.
The unit will heat the entire area contained by
the larger circle.
To use the small (6-inch) surface unit, turn the
selector knob counterclockwise to . Push in
and turn the control knob to the desired setting.
The unit will only heat the area inside the
smaller circle.
Using Your Cooktop
, the
,the
. Push in and
Radiant Cooktop
Large 9"
surface unit
setting
Small 6"
surface unit
setting