Samsung SmartCam SNH-1010N User Manual page 19

Monitoring options
1 2 3
11
10
Item
Default Camera Set the default camera to monitor in the camera list.
1
Delete Camera Delete the registered camera.
2
Cancel remembering
Cancel remembering the camera password.
3
camera password
4
5
6
7
8
9
Description
Item
Enlarges current video to the maximum size of the monitor.
Full screen
4
Supported by Internet Explorer only.
If you set Night Vision to <ON>, the camera will be automatically
converted to Night Vision mode.
If you set Night Vision to <OFF>, the camera will not be
Night Vision converted to Night Vision mode, and it will operate in a color
5
mode.
If it is converted to a black/white mode in the dark when Night
Vision is <ON>, the IR lighting will automatically operate.
Flip
You can flip over the video image.
6
Capture Image Saves a picture of current live image you are viewing.
7
Select frame rate based on your network speed.
If the bandwidth provided by the cable service provider is
Network Speed
8
lower than recommended, you may encounter a blurry image
or a temporary loss of video signal.
When enabled, you can hear what's happening around the
Sound
9
camera.
Brightness
You can adjust the brightness of the screen image.
10
Adjust the volume of the built-in microphone and speaker of the
camera as appropriate.
If you set the microphone to '0', you will not hear the sound from
Audio
11
the live video and it is not recorded by the alarm of YouTube
or Picasa. Note that the Two-way audio transfer function is
available only with the smart phone application.
Description
1
03