Table of Contents
Advertisement
Problem: Image is out of focus
Adjusts the Focus Ring on the projector lens. Refer to page 13.
4
Make sure the projection screen is between the required distance
4
3.94 to 32.81 feet (1.20 to 10.00 meters) from the projector.
Problem: The image is outstretched when displaying 16:9
DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the
aspect ratio by referring to the following: (See page 20)
Please select 4:3 aspect ratio type on your DVD player if you are
4
playing a 16:9 DVD.
If you can't select 4:3 aspect ratio type on your DVD player, please
4
refer to page 20 to choose 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
To select "Management" from the OSD and adjust the projection
4
direction. See page 25.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
4
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the "Changing the Lamp". See page
30.
Appendices
29
E
nglish
Advertisement
Table of Contents
