Fog Lamps - BMW X5 xDrive35i Owner's Manual

>
Use the headlamp flasher as usual when the
low beams are on.
System limits
The high-beam assistant cannot replace
personal judgment about the use of high
beams. In situations that require it, you should
therefore switch to low beams manually; failure
to do so can constitute a safety
In the following sample situations, the system
will not function or will only function to a limited
degree, possibly requiring the driver to react
personally:
> In extremely unfavorable weather condi-
tions such as fog or heavy precipitation
> When you perceive poorly illuminated road
users such as pedestrians, cyclists, horse-
back riders, carriages, when rail or shipping
traffic is close to the road, or at deer cross-
ings
> In sharp curves, on steep hilltops or dips,
when there cross-traffic, or in the presence
of half-concealed oncoming traffic on the
highway
> In poorly lit areas and in the presence of
highly reflective signs
> In the low speed range
> When the windshield in the region of the
interior rearview mirror is fogged, dirty, or
covered by stickers, decals, etc.
> When the sensor is dirty. Clean the sensor
on the front side of the interior rearview mir-
ror with a cloth moistened with a little glass
cleaner.
Switching on and off via iDrive
1. "Settings"
2. "Lighting"
114
Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG
3. "High beam assistant"
hazard.<
stored for the remote control currently in use.

Fog lamps*

First, switch on the parking lamps or the low
beams. The green indicator lamp in the instru-
ment panel lights up whenever the fog lamps
are on.
matically when you switch on the fog
High-beam Assistant is activated and is
If the automatic headlamp control is acti-
vated, the low beams will come on auto-
lamps.<