Advertisement
6.0 ADDITIONAL FUNCTIONS
5.3 Entering the switching times
You have 20 memory Iocations available. Each switching time takes up one
memory location.
Keep pressing the "Prog" key until a free memory location is shown in the
display "– –:– –".
Programme ON or OFF with the "
"
"= OFF; "
"= ON
Enter the hour using "h"
Enter the minutes using "m"
If a switching command is to be carried out every day (1 2 3 4 5 6 7) then
store using the "
by using the "Day" key.
When the day seIection is left bIank, the programmed switching instruc-
tion operates at the same time every day
1 2 3 4 5 6
1 2 3 4 5
6 7
Selection of single days: 1 = Mon. .............. 2 =Tues.
Save the switching time with the "
The time switch enters the automatic operating mode and displays the
current time of day.
Begin any further entry of a switching time with the "Prog" switch. If your
entry is incomplete, the segments not yet selected will blink in the dis-
play.
After programming is completed, and you return the timeswitch to the
current time display
any switching instruction required for the current time. You may need to
manually select the desired switching state with the "
Thereafter, as the unit encounters further switching instructions in the
memory in real time, it will correctly activate all subsequent switching
instructions.
6.1Switching from summer time to winter time and vice versa
Press the "+/-1 h" key once
6.2 Manual Override Switch "
With the "
" you can chage the current switching setting at any time.
The switching program already entered is not altered.
Automatic
Operation
= ON
= ON
The switching
times corres-
pond to the
program
entered.
" key:
" key, otherwise select the day(s) it is to be carried out
= Monday – Saturday
= Monday – Friday
=Saturday – Sunday
" key.
with the "
" key, the timeswitch will not activate
"
Manual
Operation
= OFF
= OFF
If the current
switching mode is
changed manually,
the next switching
time will be
carried out auto-
matically again
according to the
entered switching
program.
" key.
Continuous
Operation
= Continuously ON
= Continuously OFF
You can only
return to automatic
mode from the
continuously-ON
and continuously-
OFF
switching
modes by
pressing the "
"
key.
6.3
8
Hide quick links:
Advertisement
