Page 1
1 Ethernet lead, 1 USB lead, 1 installation CD-ROM. The SAGEM F@st™ 908 / 948 modem has an Ethernet interface and a USB interface for connection to your computer. You can use either one, depending on the interface available on your computer.
Page 2
Fast installation guide for the SAGEM F@st™ 908 / 948 Power up your modem Connect the mains cable to the PWR socket on the back of your modem. Then connect the mains connector to your nearest mains socket. The PWR light on the modem lights up, and you can go on to the next step.
Page 3
Fast installation guide for the SAGEM F@st™ 908 / 948 You have opted to use the USB interface: Connect the ADSL filters to your telephone sockets. ADSL filter You MUST connect an ADSL filter to every socket used by a telephone, a DECT, an answering machine or a Fax.
Page 4
Fast installation guide for the SAGEM F@st™ 908 / 948 Connect your modem to your telephone line using the line lead Once the modem is connected to the telephone line, ADSL synchronisation takes place automatically. When the ADSL light is on constantly, you can go on to the next step.