Serial Plate; Care And Cleaning; Cleaning The Inside; Cleaning The Outside - Frigidaire FKCH17F7HW Technical & Service Manual

Basic Information

Serial Plate

The serial plate is located inside the cabinet on the left
sidewall. The technician should always refer to the
serial plate to assure refrigerant type and quantity, as
well as electrical ratings and operating pressures.
(See Figures 1-5 and 1-6)

Care and Cleaning

• Damp objects stick to cold metal surfaces. DO NOT
touch interior metal surfaces with wet or damp
hands.
• The freezer must be unplugged (to avoid electrical
hazard) from power source when defrosting the unit.
Convertible model is frost free and will defrost
automatically, but should be cleaned occasionally.

Cleaning The Inside

After defrosting, wash inside surfaces of the freezer with
a solution of two (2) tablespoons of baking soda in one
(1) quart (1.136 liters) warm water. Rinse and dry.
Wring excess water out of the sponge or cloth when
cleaning in the area of the controls, or any electrical
parts.
Wash the removable parts with the baking soda solution
mentioned above, or mild detergent and warm water.
Rinse and dry. NEVER use metallic scouring pads,
brushes, abrasive cleaners or alkaline solutions on any
surface. DO NOT wash removable parts in a
dishwasher.

Cleaning The Outside

Wash the cabinet with warm water and mild liquid
detergent. Rinse well and wipe dry with a clean soft
cloth. Replace parts and food. Do not use razor blades
or other sharp instruments, which can scratch the
freezer surface when removing adhesive labels. Any
glue left from the tape can be removed with a mixture of
warm water and mild detergent, or touch the residue
with the sticky side of the tape already removed.
DO NOT REMOVE THE SERIAL PLATE.
Figure 1-5. Serial Plate
Figure 1-6. Serial Plate Location
1-6