Care And Maintenance; Cleaning; Storage; Troubleshooting - premiere DDR5009REE Owner's Use And Care Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

CLEANING

CAUTION: Before attempting to clean and/or service this unit, always disconnect the

power supply cord from the electrical supply outlet.

1) DO NOT use gasoline, benezene, paint thinner, or any other chemicals to clean this unit, as these

substances will damage/deform both plastic components and luster finish.

2) Never attempt to clean the unit by pouring water directly over any of the surface areas, as this will cause

deterioration of electrical components and wiring insulation.

3) Use only a mild dish washing detergent, lukewarm water, and a soft cloth to wipe the exterior surface of the

unit and dry thoroughly.

STORAGE

When the dehumidifer is not being used for long time periods, please follow these instructions:

1) Disconnect the power cord from the power supply.

2) Empty the water tank and wipe (clean) thoroughly.

3) Clean air filter thoroughly.

4) Re-package the unit in the original carton.

5) Store the unit upright in a dry location.

Occasionally, you may encounter some problems that are of a minor nature and a service call may not be

necessary. Use this troubleshooting guide to identify possible problems you may be experiencing. If the unit

continues to operate improperly, call your local Danby Service Depot or

PROBLEM

1) Unit will not operate.

2) Dehumidifying capacity

(moisture removal) low.

Relative Humidity setting not

reached after long period of

operation.