Setting Up The Drain Hose Connector - Danby DDR3008EE Owner's Manual

The Drain hose connector can be used to drain
the water externally, instead of using the water
bucket.
1. Hold the holes on both sides of the water
bucket and slide it out.
2. Remove the Drain Connector Hole cover locat-
ed in the back of the unit.
Drain Connector Hole
3. Slide the Drain Hose Connector through the
Drain Connector Hole, and connect it to the
Drain Hole.
Drain Hole
Drain Hose Connector

Setting up the Drain Hose Connector

Drain Hose
Connector
4. Connect the Drain Hose to the Drain Hose Connector.
: The Drain hose sold separately at participating
retail stores. (An optional drain hose is available
for purchase through Retail stores.)
5. Slide the water bucket back into place.
: If the water bucket is incorrectly inserted, the
Bucket Full light will come on and the product
will not operate.
10
Drain Hose