Table of Contents
Advertisement
6-10
4. When "Misfeeding Occurs."
Grasp the Fusing Unit Lever
9
the Fusing Unit.
CAUTION
DO NOT touch any parts except the paper as
the Fusing Unit and its surrounding areas are
extremely hot.
While turning Knob
10
of paper and close the Fusing Unit.
Pull out the sheet of paper from the Upper
11
Area of the Transfer/Fusing Unit.
M7
and open
M7
1144L028AB
M5
, pull out the sheet
M5
1144L029AB
1154O016AA
While turning Knob
12
of paper. If the paper adheres to the Transfer
Film, gently disengage the leading edge of
the paper and remove it, being careful not to
damage the Transfer Film.
M9
Press down on the Roller and remove any
13
sheet of paper that is inside the unit.
Slide the Transfer/Fusing Unit back into the
14
printer and turn the Release Lever
the right.
M6
M4
Close the Front Door.
15
M9
, remove the sheet
1144L031AA
1144L069AA
M4
to
1144L032AB
Advertisement
Table of Contents
