Download Print this page
GE DDC4400T Dimension Manual
GE DDC4400T Dimension Manual

GE DDC4400T Dimension Manual

5.4 cu. ft. large capacity modular commercial electric dryer

Advertisement

Quick Links

DDC4400T
GE
5.4 Cu. Ft. Large Capacity Modular Commercial Electric Dryer
®
Dimensions and Installation Information (in inches)
Exhaust Options: Shipped with exhaust to the rear.
Electric model offers 3-way venting: left, right, or rear.
Maximum recommended exhaust duct length is 25 feet
of 4" rigid ducting with two 90° elbows and 4" dampered
wall cap.
Requirements:
Electric – 120/240 Volts, 60 Hertz, 120/208* Volts, 60
Hertz, 5600 Watts at 240 Volts, 4400 Watts at 208 Volts.
An individual branch circuit fused for 30-amps is required
for each dryer.
* A special 208 Volt heater, part number WE11X0101 is
available to reduce drying time in 208 Volt installations.
For answers to your Monogram,
GE Profile
®
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
or
service,
Gas Dryer
only
27
Front View
Note: Dimensions and specifications shown here are correct at the time this sheet was printed. Before
proceeding with construction or rough-in, check installation instructions that came with your unit.
Specifications, dimensions and design are subject to change without notice.
Note: Wall anchor chain provided for gas models only.
Cmmrcl. Front.eps
77
27
3/4
DDC4400S Back View
Specification Revised 5/09
11-3/4
41-5/8
3-1/2
2-3/8
1-7/8
Rear View
Listed by
Underwriters
Laboratories
370404

Advertisement

loading

Summary of Contents for GE DDC4400T

  • Page 1 208 Volt installations. For answers to your Monogram, GE Profile ® ™ ® appliance questions, visit our website at ge.com or call GE Answer Center service, ® 800.626.2000. Gas Dryer only Front View Note: Dimensions and specifications shown here are correct at the time this sheet was printed. Before proceeding with construction or rough-in, check installation instructions that came with your unit.
  • Page 2 Dimensions and Installation Information (in inches) For complete information, see installation instructions packed with your dryer. Important Note: GE Kit Number WE14X70 needed when converting rear exhaust to bottom or side. (On large capacity models.) Ducting Materials: For best performance, this dryer should be vented with 4" diameter all rigid metal exhaust duct.
  • Page 3 • Reversible Door • Model DDC4400TWH – White (Electric) For answers to your Monogram, GE Profile ® ™ ® appliance questions, visit our website at ge.com or call GE Answer Center service, ® 800.626.2000. Listed by Underwriters Laboratories Specification Revised 5/09...

This manual is also suitable for:

Ddc4400twh