Interactive Function - Sony BrightEra VPL-SW526M Specification

Interactive Function

The Interactive function of the VPL-SW526M allows presentation
files to be controlled using an interactive pen. In addition, two
users can draw concurrently on the projection surface using
dual interactive pens.
File control by interactive pen
Installation Advantages
The VPL-SW526M/VPL-SW526CM projectors are equipped with an
optical zoom and lens shift capability. Using this function, the
position of the projected image can be easily adjusted to the
desired settings during installation. This greatly reduces the time
and hassle of fine-tuning the image position without having
to physically move the projector or sacrifice image quality. In
addition, these projectors ship with an original wall mount from
Sony which allows adjustment of projector pitch, roll, and yaw.
"Blend-in" Design
The VPL-SW526M/VPL-SW526CM projectors showcase a new
low-profile chassis, so these projectors appear to blend into
the ceiling or wall on which they are mounted.
Good TCO, Energy-efficient Design
Auto Power Saving Function
•Auto Mode (Auto Brightness Adjustment Function)
The brightness of the lamp's output is automatically
adjusted depending on the brightness of the projected
image, to avoid unnecessary power consumption.
When showing darker images that don't require high
brightness, lamp output decreases.
Lamp drive
High
•Lamp Dimming Function
The projectors are equipped with a lamp dimming function.
After 10 seconds of a static signal feed, the lamp dims by
approximate 15% which is hardly noticeable.
If one of these projectors is left powered on while not in
use, after a set period of time it will automatically detect
no change of signal input and will dim the lamp to as low
as approximate 30% of original brightness to significantly
reduce energy consumption.
Input (image)
Lamp power*
Dual-pen
•Blank (Picture Muting)
The VPL-SW526M/VPL-SW526CM projectors
can temporarily disable video signal output.
This function can be easily operated with just
the touch of a button on the supplied Remote
Commander™ unit. In addition, this function
allows blank image projection with low power
consumption using lamp control technology.
Example of
class room
Lamp Drive
Normal
condition
Energy Saving Design
The VPL-SW526M/VPL-SW526CM projectors offer remarkably
low power consumption, allowing users to make significant
savings on their electricity expenses.
ECO MODE Key
With a single push of the ECO MODE key on either the
projector or the supplied Remote Commander unit, users can
select an energy-saving setting from the ECO Mode menu.
Long-lasting Lamp
Simulated images
By incorporating a high-performance lamp and advanced
lamp-control technology, the VPL-SW526M/VPL-SW526CM
projectors deliver an extremely long lamp replacement time
of 6,000 hours.*
* Approximate recommended period, in low mode.
A B B
100%
Slowly
85%
Automatically Automatically
(-15%)
30%
In use
(-70%)
0 sec. 10 sec. 5/10/15/20 min.
Lamp dimming scheme
Class time Recess time
Projection
(100%)
Lamp 30% with blank image
B C
Lamp dimming
Quickly
Slowly
(Restart)
Not in use In use
Time
Class time
Blank Projection
Quick restart Quick restart
The values are approximate.
3