GE 106588 Instruction Manual page 3

1875-watt styler dryer
Table of Contents

Advertisement

Available languages

Available languages

12. Attachments may be hot during
use. Allow them to cool before han-
dling.
13. Do not place appliance on any sur-
face while it is operating.
14. While using the appliance, keep
your hair out of it. Keep your hair
away from the air inlets.
15. Do not use with voltage converter.
For a dual voltage hair dryer:
16. Be sure dual voltage selector is in
correct voltage position before oper-
ating. Before plugging in, read the
information about dual voltage con-
tained in the instruction section of
this manual.
17. This appliance was set at the facto-
ry to operate at 125 volts. Refer to
Additional Information section of this
manual for conversion to 250 volts
operation.
IMPORTANT
1875 WATT OPERATING GUIDE
Use of any 1875 watt dryer on the
same circuit or fuse with other electri-
cal products or appliances may trip a
15 amp circuit breaker or blow a 15
amp fuse.
NEVER replace the fuse with one
rated higher than the capacity of the
circuit. Doing so could result in an
electrical fire.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is intended for house-
hold use only. Use on Alternating
Current (50/60 hertz) only. Standard
Dryers are designed to operate at 110
to 125 volts A.C.
This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will fit in
a polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not
attempt to defeat this safety feature.
CHECK ALCI SAFETY
FEATURE EVERY TIME
YOU USE APPLIANCE.
This appliance is equipped with an
Appliance Leakage Circuit Inter-
rupter (ALCI), a safety feature that
renders it inoperable under some
abnormal conditions, such as immer-
sion in water. To make sure the ALCI
is functioning properly, perform the
following test. The purpose of this test
is to allow you to make sure the water
sensing system (ALCI) is working.
1. Plug in the appliance and press test
button on plug (See appropriate dia-
gram below).

Advertisement

Table of Contents
loading

Table of Contents