Solution Suggestions For Problems - Beko DRVT 71 W Installation And Operating Instructions Manual

9

Solution suggestions for problems

Problem
Drying process
The filter might have not been
takes too much
cleaned.
time.
* The filter might have not been
Laundry comes
cleaned.
out wet at the end
* Excessive laundry might have been
of drying.
loaded in.
* It might have not been plugged in.
* The loading door may be ajar.
Machine does not * Programme might have not been set
switch on or the or the «Start/Pause/Cancel» button
programme does might have not been pressed.
not start. Machine * «Childproof lock» might have been
is not activated activated.
when set. * The condenser cover on the models
with a condenser might not be closed
securely.
Programme has
* The loading door may be ajar.
been interrupted
* Electricity may be cut off.
without any cause.
Laundry has
shrunk, become * A programme suitable for the laundry
felted or type might have not been used.
deteriorated.
Drum light does
not come on. * The machine might have not been
(for models started by using the On/Off button.
equipped with a * Bulb may have blown.
lamp)
* The 2-hour anti creasing programme
0 / Anti-creasing"
to prevent laundry from creasing might
LED flashes.
have been activated.
0/ Anti-creasing"
* Programme has come to an end.
LED is on.
"Filter cleaning"
* Filter might have not been cleaned.
LED flashes.
A
Call an authorised service agent if the problem persists.
Cause Explanation / Suggestion
* Meshes of the filter may be clogged.
Wash with water.
* Meshes of the filter may be clogged.
Wash with water.
* Do not overload the machine.
* Make sure that the machine is plugged in.
* Make sure that the loading door is
properly closed.
* Make sure that the programme has been
set and it is not in "Pause" mode.
* Deactivate the childproof lock.
* Make sure that the condenser cover and
the red lock is closed securely.
* Make sure that the loading door is
properly closed.
* Press «Start/Pause/Cancel» button to
start the programme.
* Dry only the laundry which is suitable for
drying in your machine after checking the
labels on your clothes.
* Select a programme with suitable low
temperature for the laundry type to dry your
clothes.
* Make sure that the machine is On.
* Call the authorized service to replace the
bulb.
* Turn off the machine and take out the
laundry.
* Turn off the machine and take out the
laundry.
* Clean the cover filter.
20 EN