Remote Controller Operation - Alpine KCE-635UB Owner's Manual

Remote Controller Operation

1
2
3
4
5
6
7
8
1 Source buttons
Select the desired player mode by pressing the
corresponding source button.
Arrow buttons (up, down, left, right)
2
Use the arrow buttons to navigate the OSD and
to do select the desired settings.
In file browser mode, the left/right arrow buttons
can be used scrolling page-wise.
OK button
3
Press the OK button to select a highlighted menu
item.
4 Skip/Seek forward/backward buttons
Press these buttons to select the next/prev. file to
be played. A long press (> 2sec.) will start the fast
forward/backward seek mode.
Play/Pause button
5
Press the play/pause button to start, pause and
resume the current playback.
6 AUX button
Press the AUX button in order to activate the
auxiliary AV input. A long press (> 2sec.) will
switch the camera signal to the front video output.
Any other command will switch back to the
previously selected video signal.
7 USB button
Press the USB button in order to return from the
AV auxiliary to the USB playback mode.
Power button
8
Press the button to turn the device on/off.
4-EN
9
10
11
12
13
14
15
RUE-4230
Mute button
11
Press the mute button to switch on/off the audio
output.
10 VOL+ / VOL- buttons
Press these buttons to adjust the volume ouput
level.
Menu button
9
Press the menu button to enter the main menu.
12 ZOOM button
Press the zoom button in order to select the desired
screen zoom level (audio and video mode only).
13 M.I.X. button
Press the M.I.X. button in order to activate file
playback in random order.
14 ROTATE button
Press the rotate button in order to turn the picture
clockwise by 90 degrees (photo mode only).
A long press (>4sec.) will reset and reboot the
player.
REPEAT button
15
Press the repeat button in order to select the
desired repeat mode.
repeat one
repeat all off