Supported Program - Samsung Plasma TV 4 series User Manual

Supported Program

Self Diagnosis
❑
Picture Test
„
If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still
exists.
Does the problem still exist with this test photo?
N
in the test pattern, select Yes. If the test pattern is properly displayed, select No.
• Yes : There may be a problem with the TV. Contact Samsung's Call Center for assistance.
• No : There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to
the external device's user manual.
Sound Test
„
If you think you have a sound problem, please perform the sound test.You can check the sound by playing a built-in melody sound
through the TV.
Does the problem still exist with this sound test?
N
from one speaker or not at all, select Yes. If you can hear sound from the speakers, select No.
• Yes : There may be a problem with the TV. Contact Samsung's Call Center for assistance.
No
• : There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to
the external device's user manual.
If you hear no sound from the TV's speakers, before performing the sound test, make sure
N
in the Sound menu.
The melody will be heard during the test even if
N
the MMUTE button.
If headphones are connected, the test melody will play through the headphones.
N
Signal Strength (Digital channels only)
„
You can adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
N
Continue to adjust the antenna until you fi nd the best position with the strongest signal.
Software Upgrade
❑
To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of
the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the
option to install the upgrade.
By USB
„
Insert a USB drive containing the fi rmware upgrade into TV. Please be careful to not disconnect
the power or remove the USB drive while upgrades are being applied. The TV will turn off and
turn on automatically after completing the fi rmware upgrade. Please check the fi rmware version
after the upgrades are complete. When software is upgraded, video and audio settings you
have made will return to their default (factory) settings. We recommend you write down your
settings so that you can easily reset them after the upgrade.
By Channel
„
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade
„
To continue software upgrade with master power on, select on by pressing the ▲ or ▼ button. 45 minutes after entering standby
mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.
Alternative Software
„
Replace the current software with the alternative.
HD Connection Guide
❑
The brief instruction on How to get the best performance from your HD TV is displayed. We offer the connection method for HD
devices.
Contact Samsung
❑
You can know the Samsung Call center, website and information for product.
You can move the previous or next page by pressing the ▲ or ▼ button.
N
appears on the screen.If the test pattern does not appear or there is noise
appears on the screen.If during the sound test you can hear sound only
Speaker Select is set to External Speaker or the sound is muted by pressing
English - 27
Speaker Select is set to TV speaker
TV Rear Panel
USB Drive