Setting Options; Indicator Lamps - BMW M6 Convertible Owner's Manual

Controls
M Drive
The concept
Individual settings can be carried out in two pre‐
assigned configurations for the vehicle.
When the engine is started, an efficient driving
state is active by default. M Drive is deactivated.
At a glance
Configurations
The configurations are preassigned as follows:
▷ "M Drive 1": relaxed, comfortable driving.
▷ "M Drive 2": sporty, dynamic driving.

Setting options

Symbol Meaning
Dynamic Stability Control DSC, refer
to page 114, and M Dynamic Mode
MDM.
Programs of M Engine Dynamics
Control, refer to page 74.
Programs of Electronic Damper Con‐
trol EDC, refer to page 116.
Programs of Servotronic, refer to
page 117.
M double-clutch transmission with
Drivelogic, refer to page 70: shift
modes and Drivelogic driving pro‐
grams.
Views of the Head-Up Display, refer
to page 128.
Configuring M Drive
The preassigned configurations can be individ‐
ually adjusted.
1. "Settings"
2. "M Drive 1" or"M Drive 2"
60
Adjusting
Online Edition for Part no. 01 40 2 903 192 - 07 12 490
3. Select the desired setting option.
4. Select the desired channel.
The individual settings are stored for the remote
control currently in use.
If M Drive is activated, a change in the setting on
the Control Display is immediately adopted.
Activating/deactivating M Drive
Activating
Press the corresponding button on the steering
wheel:
▷ Activate M Drive 1.
▷ Activate M Drive 2.
If DSC OFF or MDM is set in M Drive, a message
appears in the instrument cluster. This message
is confirmed by pressing the button again.
Deactivating
Press the corresponding button on the steering
wheel.

Indicator lamps

▷ Indicator lamp comes on: corre‐
sponding M Drive is activated.
▷ Indicator lamp flashes: M Drive could
not be activated. Antilock braking
system ABS or Dynamic Stability
Control DSC directly regulate the
driving stability.
Reactivate M Drive if indicator lamp
is no longer flashing.
Notes
If M Drive is activated, individual settings can
also be modified outside of M Drive, e. g. using
the buttons in the center console. This deacti‐
vates M Drive.
To reactivate all settings made for M Drive on
the Control Display, briefly press one of the fol‐
lowing buttons: