Seat And Mirror Memory - BMW 328i xDrive Owner's Manual

Seat and mirror memory*

You can store and call up two different combi-
nations of driver's seat and exterior mirror
positions.
Settings for the backrest width and lumbar
support are not stored in memory.
Storing
1. Switch on radio readiness or the ignition,
refer to page 55.
2. Adjust the seat and exterior mirrors to the
desired positions.
3. Press the button.
The LED in the button lights up.
4. Press the desired memory button 1 or 2:
the LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up the memory while you are
driving; otherwise, unexpected seat
movement could result in an
Comfort function
1. Unlock and open the driver's door or switch
on radio readiness, refer to page 55.
2. Briefly press the desired memory button 1
or 2.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
48
Online Edition for Part no. 01 41 2 604 638 - © 02/10 BMW AG
Safety feature
1.
2.
If the
Press the button again; the LED goes out.
Call-up with the remote control
The driver's seat position last set is stored for
the remote control currently in use.
You can select whether or not the seat is reset
to that position automatically.
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Selecting automatic call-up
1.
2.
3.
accident.<
the last seat position is switched on and is
stored for the remote control currently in use.
Switching off automatic call-up
Deactivate "Last seat position automatic".
Close the driver's door and switch the igni-
tion on or off, refer to page 55.
Press the desired memory button 1 or 2
and keep it pressed until the adjustment
process has been completed.
button was pressed accidentally:
When this Personal Profile function is
used, first make sure that the footwell
seat.<
"Settings"
"Door locks"
"Last seat position auto."
The function for automatically calling up