Related Manuals for Goodmans GTVL19W17HDF
Summary of Contents for Goodmans GTVL19W17HDF
- Page 1 ATV/DTV VOL. GUIDE SLEEP /TEXT CH. LIST SUBTITLE I-II P.MODE P.SIZE EXIT MENU INFO/i SOURCE FAST TEXT...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
-
Page 3: Electrical Information
MAINS PLUG WIRING Electrical Information This appliance is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply sockets it must be removed and replaced with an appropriate plug. If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions below. - Page 4 IMPORTANT SAFETY INSTRUCTIONS Do not attempt to service the equipment yourself. Opening and removing the covers may expose you to dangerous voltage or any other hazards and may void your warranty. Refer service from qualified personnel. Do not place or drop any other objects on top. Do not insert anything into the ventilation holes of your equipment.Inserting any metal or flammable objects may result in fire or electric shock.
- Page 5 WARNINGS ● Unqualified attempts to repair this TV are not allowed. Refer repairs to this unit to a qualified technician only. ● Do not disassemble this unit. There are dangerous-voltage parts inside that may cause electric shock even after power is disconnected. ●...
-
Page 6: Table Of Contents
CONTENT PREPARATION ......................6 Features ................................6 Package Contents ............................... 7 LCD TV .................................. 8 Front View ................................8 Rear View ................................9 Remote Control ............................... 10 Setting up your LCD TV............................13 Using your LCD TV............................... 14 INSTALLATION ...................... Connecting a TV Cable or Aerial......................... -
Page 7: Preparation
PREPARATION Features Features High Brightness / Contrast Image Brightness: 0 cd/m Contrast Ratio: 00: VGA Support: 60x80/60Hz~0x768/7Hz Multimedia socket VIDEO in socket S-VIDEO in socket SCART socket (RGB, CVBS ,CVBS+RGB,Y/C input) Y Pb Pr in socket VGA in socket HDMI in socket WSS (Wide Screen Scale ) Function This function can automatically convert and display any aspect ration (: / Wide) TV broadcast signal. -
Page 8: Package Contents
Package Contents Once you open the box, make sure all of the following contents are included.If you’re missing any items, please contact your dealer. LCD TV Remote control/ Video Cable Audio Cable AAA batteries Power Cord User Guide (you are reading it) These items are all you need to set up and operate the LCD TV in its basic configuration. -
Page 9: Lcd Tv
LCD TV Front View ITEM DESCRIPTION 1 IR Infrared Receiver (IR) LED The LED light indicates when the LCD TV is activated (Red = standby, Green On). Connects to the external headphone for private listening. 3 HEADPHONE Power Button 4 POWER Turns the LCD TV on and off. -
Page 10: Rear View
LCD TV Rear View Power Switch. AC IN PC AUDIO IN ITEM DESCRIPTION Connects the AC power cord to this socket./ Make sure that this switch 1 AC IN / Power Switch is in the ON position (Red LED light will show on the bottom centre of the TV). -
Page 11: Remote Control
Remote Control POWER Turns the LCD TV on and into standby mode . Mutes and restores your LCD TV sound. ATV/DTV Pressing enter ATV (analogue) or Digital (DTV) Mode. Select and switch to a channel by using 0-9 buttons. GUIDE In DTV mode,pressing GUIDE key displays the electronic program guide on the screen. - Page 12 Remote Control INFO/i Pressing once displays a variety of information such as the current channel and the input source. Cycles among the different input signal sources: TV AV1(SCART) AV2(S-VIDEO) AV3(CVBS) AV4(Y Pb Pr) AV5(VGA) AV6(HDMI) Accesses the TELETEXT items or corresponding pages.
- Page 13 Remote Control Installing the batteries in your remote control Pull the tab of the back cover and pull up on the cover to open the batter y compar tment of the remote control. Inser t two A A A size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the batter y compar tment.
-
Page 14: Setting Up Your Lcd Tv
Setting Up Your LCD TV How to install the TV Stand Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. LCD TV Stand Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown: Then push until stand clicks into the LCD TV’s stand socket. -
Page 15: Using Your Lcd Tv
Using your LCD TV The Power button on the front panel and also on the remote control is only used for powering up and switching the T V to standby mode,it does not disconnect the device from the mains supply. To completely disconnect the main voltage, please switch off the power switch on the rear of the T V, or remove the power plug from the socket. -
Page 16: Installation
INSTALLATION Refer to the owner’s manual of the external equipment to be connected.When connecting external equipment, do not connect any AC power cords to wall outlets until you have completed all the connections. Connecting a TV aerial Basic Connection: Connecting an aerial . Make sure the power switch is switched of f. -
Page 17: Connecting A Dvd Player
Connecting a DVD Player For best picture quality, if your DVD player has (Y Pb Pr) video output, Please use component cable instead of a standard video or S-video cable (cables not supplied). Otherwise connect using a standard Scart cable (not supplied). PC AUDIO IN Audio Audi... -
Page 18: Connecting A Vcr & A Video Camera
Connecting a VCR & a Video Camera PC AUDIO IN Audio Audi ideo Video/Audio Cable METHOD A (AV) Use an Audio cable to connect the VCR’s/ the VIDEO CAMERA’s audio output sockets to your LCD TV. Use a S-Video cable to connect your LCD TV and VCR player/ VIDEO CAMERA. METHOD B (AV) Use an A/V cable to connect the VCR’s/ VIDEO CAMERA’... -
Page 19: Connecting A Tv Box And Satellite Receiver
Connecting a TV Box and Satellite Receiver Freeview / Sky boxes will usually have scart cables supplied with them. Connect the scart cable to the scart socket on the rear of the TV. PC AUDIO IN PC AUDIO IN Audio Audi ideo HDMI CABLE... -
Page 20: Connecting An Audio Receiver
Connecting an Audio Receiver For best Sound quality, you may want to play the LCD TV audio through your Dolby digtal surround system system. PC AUDIO IN Dolby digital amplifier Use an audio cable to connect the audio receiver’s audio LINE IN sockets to LCD TV ‘s DIGITAL OUT sockets. -
Page 21: Hdmi
HDMI HDMI -This TV can accept High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI). -This TV SET supports HDCP(High-bandwidth Digital Content Protection) Protocol for TV SET (480p, 720p, 1080i) modes. -When you connect to the output of an HD ready player (DVD Player, Set Top Box or PC) switch to the AV6(HDMI) function and the TV will automatically detect the resolution used by the HDMI source. -
Page 22: Using The Features
USING THE FEATURES Basic Operation Tuning in the TV channels After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the front centre panel of the TV. -
Page 23: Osd Menu Operation
OSD Menu Operation The main menu provides access to the following menus: Video Adjust picture setting such as picture mode, contrast, brightness,sharpness colour and advanced. Audio Adjust sound option and effects. Setup Adjust colour standard, sound standard, APS, Manual search, Channel setup. Preferences Adjust preferences such as OSD, blue screen, childlock, sleep timer, OSD timer, OSD reset. -
Page 24: Audio
Video OPTION DESCRIPTION Advanced Display Mode Allows you to select the display mode to be Wide, 4:3, Original, Zoom. Allows you to adjust the (Dynamic Contrast Enhancemen) to be off, low, mid, high. Blue Allows you to adjust the blue Stretch stretch. -
Page 25: Setup
Setup (Analogue TV only) Setup menu is only available when viewing Analogue TV. Use this Setup menu to select Colour Standard, Sound Standard, APS, Manual Search, Channel Setup.Use the Up/ Down arrow buttons to highlight the required setting. Press the Press OK button to select the function. Use left / right arrow buttons to adjust the settings. -
Page 26: Preferences
Preferences Use this Preferences setting menu to set up some features: OSD, Blue Screen, Childlock, Sleep Timer, OSD Timer, OSD Reset. OPTION DESCRIPTION Language : Allows you to select the OSD to be English, German, French, Spanish, Italian, Dutch, Portugese, Polish Russian. -
Page 27: Using The Dtv Features
USING THE DTV FEATURES DTV OSD Menu Operation OPTION DESCRIPTION Edit Channel Lock some channels that are not List suited for younger members of the family, skip/add the channel list as you wish. Configuration Add new channel, set audio language, subtitle language, as you wish. - Page 28 When you complete the edit, press the EXIT button to quit the favourite channel list menu. The next menu will ask if you want to save the changes you have made, using ◄/► to highlight the YES option, and press the OK button to save the changes. Once you lock a channel, you must enter the PIN Code that is set in the parental control menu at first before the channel is displayed.
- Page 29 Configuration Highlight the Configuration option, then press OK button to enter the selected option. The configuration menu is displayed on the screen now. Channel Installation Use these options If you have moved location or want to rescan for new channels. Press OK button to display the channel installation menu.
- Page 30 If you want to install the channels by yourself, using the▲/▼buttons to highlight the channel installation (manual) option, and press ok to install manually. First you should choose the installation type, then you can see the following menu. Using ◄/►to cycle the channel option, then the bar graphs of signal level and signal quality will indicate whether any channels are likely to be found.
- Page 31 User Settings Using the ▲/▼buttons to highlight the user settings item in the configuration menu, then press OK button to display the user settings menu. Audio Language This function select which language soundtrack you will hear when switching to a channel broadcasting with multiple soundtracks.
- Page 32 System Information Highlight the system information item in the system parameter menu, pressing OK button to display the system information menu. You can view the system information in this menu, however, you can modify nothing in this menu, Pressing OK button to quit. Signal information Highlight the Signal information item in the configuration menu, pressing OK button to display the Signal information menu.
- Page 33 Parental Control Highlight the parental control line in the parental control menu and use ◄/►buttons to cycle through the enable and disable option. Toggle this option to enable, then the following items can be altered. Receiver lock You should enter the PIN CODE before you can see the DTV program while you power on the TV and select the DTV source.
- Page 34 PIN Code change Pressing the ‘RED’ button will popup the PIN code change menu, enter the previous code by using the 0-9 buttons on the remote control, then enter the new code twice to confirm and this menu will disappear (The PIN is factory set to 0000). Pressing EXIT to quit without saving the new code.
-
Page 35: Troubleshooting
TROUBLESHOOTING Before contacting Goodmans Helpline, check the following chart for a possible cause of the trouble you are experiencing and for a solution. PROBLEM SOLUTION □ TV will not turn on Make sure the power cord is plugged in. □... -
Page 36: Specifications
SPECIFICATIONS Model GTVL19W17HDF Panel System 19 inch LCD panel Display Resolution 1440 pixels (horizontal) x 900 pixels (vertical) Television System PAL- I Brightness 450 cd/m Contrast Ratio 500:1 Inputs/Output SCART HDMI PC Audio In Video In S-video In Phones Y Pb Pr... - Page 37 Display Mode For the display modes listed below, the screen image has been optimized during manufacture. VGA TIMING Dot X Line Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x 480 31.46 59.94 640 x 480 37.86 72.80 640 x 480 37.50 75.00 800 x 600 37.87 60.31...