Advertisement
Step2
Mounting the server into the rack
(1) Fully slide the rails out until they lock in place. And while pressing down on the
release lever, slide the rails to remove the inner rail.
Release Lever
Fix the inner rail with eight screws (A) to both sides of the server.
(2)
(3) Place the template in the desired location of the rack and attach four core nuts that
come with the rack assembly to the mount flange in the rack.
Core nut positions
Slide
Rail
Front side
Slide Rail Assembly
Cable Arm position
Slide
Back side
‚U
Outer Rail
Inner Rail
Core nut positions
Rail
Advertisement
