Restart Menu - Lenovo ThinkPad L330 User Manual

Table 6. Startup menu items (continued)
Menu item
Boot Mode
Option Key Display
Boot Device List F12 Option
Boot Order Lock

Restart menu

If you need to close the ThinkPad Setup program and restart the system, select Restart from the ThinkPad
Setup program main menu. The following submenu is displayed:
• Exit Saving Changes: Restart the system after saving the changes.
• Exit Discarding Changes: Restart the system without saving the changes.
98
User Guide
Selection
• Quick
• Diagnostics
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
Comments
Screen during POST:
• Quick: The ThinkPad Logo screen
is displayed.
• Diagnostics: Test messages are
displayed.
Beep at POST completion:
• Quick: No. Sounds on error cases
only.
• Diagnostics: Yes. Always sounds.
"Ctrl-S" prompt for on-board
Ethernet:
• Quick: No.
• Diagnostics: Yes.
Memory testing during POST:
• Quick: Quick test (or no test).
• Diagnostics: Full test.
Testing other devices during POST:
• Quick: Minimum test (or no test).
• Diagnostics: Can perform
necessary testing for critical
devices.
Note: You can also enter the
Diagnostic mode by pressing Esc
during POST.
If you select Disabled, then the
message "To interrupt normal startup,
press Enter" is not displayed during
the POST.
If you select Enabled, the F12 key
is recognized and the Boot Menu is
displayed.
If you select Disabled, your computer
will boot using the default priority. If
you select Enabled, your computer
will boot using the priority you have
customized.