NEC SuperScript 950C User Manual page 31

C P C
HANGING A RINTER ARTRIDGE
Use the Change button when you need to replace a Print
Cartridge.
To change a Print Cartridge:
1. Click Change to move the print cartridge to the
loading position.
2. Replace the print cartridge.
3. Click OK to return the print cartridge to its rest
position.
4. Depending on the color of the cartridge click Reset
Black or Reset Color .
The printer will then initialize the cartridges; a process
that will take 3-5 minutes.
When ever a cartridge is replaced, the cartridges must be
aligned.
A P C
LIGNING THE RINT ARTRIDGES
Before aligning the print cartridges, assure that both print
cartridges are installed and paper is loaded.
Whenever a print cartridge is replaced, you must always
check the horizontal and vertical printing alignment. This
operation can also be performed if the print quality is not
satisfactory.
Aligning the cartridges takes about 3 minutes and requires
at least 2 sheets of paper. Status messages will guide you
through the procedure, and at the end of the procedure, a
confirmation test is performed.
To Align the cartridges:
• Click Align , then follow the instructions displayed on
your monitor.
C P C
LEANING THE RINT ARTRIDGES
The print cartridges are cleaned periodically during the
printing process. If this automatic cleaning is not sufficient
to give you the required quality, you can clean the print
cartridges by clicking the Clean button.
This operation takes about 1 minute. After cleaning, click
Test Page to print a test page then verify the quality. After
this operation, all the nozzles should function correctly. If
results are still unsatisfactory, manually clean the nozzles
of the print cartridges as described on page 36.
P D P
RINTING A EMONSTRATION AGE
The demonstration page lists all the features of your
printer. It also assures that the driver and the printer
monitor have been correctly installed. Click Demo to print
the page.
P T
RINTING A EST PAGE
The test page shows printer technical specifications and
can be helpful when calling NEC technical support. To
print a test page, click the Print Test button.
27