Window Requirements; Storm Window Requirements - GE ASM12* Owner's Manual And Installation Instructions

Window Installation Instructions
1

WINDOW REQUIREMENTS

• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
Models ASD06, ASM08, ASQ10, ASV10 only
(See below illustration for Models ASM10, ASM12,
ASQ12, ASV12, ASQ14, ASV14.)
" to 36"
24 3 ⁄
4
(With accordion panels)
Models ASM10, ASM12, ASQ12,
ASV12, ASQ14, ASV14 only
(See above illustration for Models ASD06,
ASM08, ASQ10, ASV10.)
26" to 39
(With accordion panels)
" min.
14 3 ⁄
4
" min.
16 1 ⁄
4
"
1 ⁄
2

STORM WINDOW REQUIREMENTS

2
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame or the vinyl frame.
Attach securely with nails or screws
provided by the installer.
1/2" higher
than storm
window
frame
Storm window
frame
REMOVE THE FRONT GRILLE
3
(IF ATTACHED)
A
Remove shipping tape, if present.
On models with a
raise-up inlet grille,
lift it and remove
the screw behind it
(if present) that holds
the grille in place.
On models with a
slide-out air filter,
remove it and the
screw behind it
(if present) that holds
the grille in place.
B
Gently but firmly grasp
the lower grille corners,
press in on the case
sides and pull forward
to release.
NOTE: Do not pull the
bottom edge toward
you more than 3" or
you may damage the tabs of the grille.
Lift the grille up and off the top tabs.
C
11
1/2" higher
than vinyl frame
(on some windows)
Wood
Stool
Vinyl frame