Activating/Deactivating The Lock Mode; Using The Equalizer; Adjusting The Contrast Of The Graphic Display; Exiting The Operating Menu - Sennheiser EM 500 G2 Instructions For Use Manual

Lock
Equalizer
LCD Contr
Exit
24

Activating/deactivating the lock mode

Via the "Lock" menu, you can activate or deactivate the lock mode.
The lock mode prevents that the receiver is accidentally programmed or
switched off during operation. The lock mode icon on the display indicates
that the lock mode is activated.
To deactivate the lock mode, first press the
buttons to select "Off". If you confirm your selection by pressing the
the buttons can be operated as usual.

Using the equalizer

Via the "Equalizer" menu, you can change the treble and bass of the audio
signal available at the audio output (AF OUT):
Selectable setting
"Flat"
(treble and bass of the output signal
remain unchanged)
"High Boost"
(boosting the treble)
"Low Cut/High Boost"
(cutting the bass and boosting the
treble)
"Low Cut"
(cutting the bass)

Adjusting the contrast of the graphic display

Via the "LCD Contr" menu, you can adjust the contrast of the graphic display
in 16 steps.

Exiting the operating menu

Via the "Exit" menu, you can exit the operating menu and return to the
standard display.
SET button and then press the /
SET
Display
button,