Daily Use; Helpful Hints And Tips - Zanussi ZEI6240FBA User Manual

Heat setting displays
Display
-
Residual heat indicator
Warning! The risk of burns from
residual heat!

Daily use

Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated
• You do not set the heat setting after you acti-
vate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). Remove the object or
clean the control panel.
• The appliance become too hot (e.g. when, a
saucepan boils dry). Before you use the ap-
pliance again, the cooking zone must be
cool.
• You use not correct cookware. The symbol
comes on and the cooking zone deacti-
vates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time,

Helpful hints and tips

6
The cooking zone is deactivated.
The cooking zone operates.
The cookware is incorrect or too small, or there is no cookware on the cook-
ing zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Automatic Switch Off operates.
.
Description
The induction cooking zones make the heat
necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from
the heat of the cookware.
comes on and the appliance deactivates.
See below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
- — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The cooking zone selection
To set the cooking zone touch the sensor field
related to this zone. The display confirms
your selection by the dot adjacent to the heat
setting indication (
The heat setting
Set the cooking zone. Touch
heat setting. Touch
setting. The display shows the heat setting.
Touch and at the same time to deacti-
vate the cooking zone.
INDUCTION COOKING ZONES
).
to increase the
to decrease the heat
www.zanussi.com