Table of Contents
Advertisement
Charging a Device Using Your Device USB Cable
You can use your own device USB cable to connect to your device . However, for devices with
mini or micro USB power ports, it is highly recommended that the included mini or micro USB
adapter tips with retractable cable are used in place of the device USB cable .
1 . Insert the USB plug on the device cable into the USB port on TekCharge .
2 . Connect the USB cable into the power jack on your
portable device .
3 . Slide the TekCharge power switch to ON
to provide power through the USB port .
4 . Turn on the portable device and use it
as you would normally . While connected,
TekCharge will power and/or charge your device .
Or
Leave the portable device turned off and TekCharge will charge the device battery .
5 . When finished, unplug the USB cable from TekCharge and your device .
TIP: You can use the emergency flashlight while charging your device.
Troubleshooting
If TekCharge does not power your portable device or charge the device battery, take these
steps:
1 . Check that the input/output cord is connected to both TekCharge and the portable device,
and that the adapter plug fits snugly into the power jack on your portable device . If not,
try another adapter .
2 . If connecting TekCharge to a device with a DC jack, verify that the polarity of the device
power jack is center positive . If the polarity is center negative, do not power the device with
TekCharge as it does not support center negative .
USER GUIDE
Center Negative
Center Positive
7
Advertisement
Table of Contents
