Mounting On A Table - LG 26LT670H Quick Reference Manual

20
ASSEMBLING AND PREPARING

Mounting on a Table

1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
y y
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
(For 26/32/37/42LT670H, 32/37/42/47LT770H,
26LT673H)
Swivel 90 degrees to the left or right and adjust
the angle of the TV to suit your view.
90˚
(For 32/37/42/47LT777H)
The swivel angle is adjustable. The default swivel
angle is 20°. Attaching a screw to the A position
on the bottom of the stand will allow a swivel
angle range of 45°. Attaching a screw to the B
position will allow a swivel angle range of 90°.
1 0 c m
10 cm
Only one swivel screw is included and
y y
attached to position C.
When adjusting the angle of the TV, watch
y y
out for your fingers.
- Personal injury may occur if hands or
90˚
Removing the swivel fixing screw will allow
y y
the set to rotate 360°.
20˚
C A
B
NOTE
CAUTION
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
20˚