Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Boss Audio Systems MR1630UA
Summary of Contents for Boss Audio Systems MR1630UA
-
Page 2: Location And Function Of Controls
LOCATION AND FUNCTION OF CONTROLS 1. POWER BUTTON When the unit is powered off, it will switch on by pressing any button except the EJECT and RELEASE button. When the unit is ON, Press and hold POWER button to turn it off. 2&3&4. - Page 3 but has the TP information. When TP information gets lost at the current station for retune time which is set by RETUNE SHORT(90 seconds) or RETUNE LONG(150 seconds), the radio starts to retune to next same PI station. When same PI station does not receive in 1 cyclic search, the radio retunes to next station with TP information.
- Page 4 b) During disc playback mode or USB mode: Press the > or < button briefly to play next or previous track. Press the >or < button and hold to skip forwards or backwards, release to resume normal playback. 9. BAND BUTTON During radio mode, press the BAND button briefly to select the radio broadcasting band you would like to hear.
-
Page 5: Specification
* TA interruption function: SPECIFICATION The current traffic announcement is cancelled by pressing this key. But the TA mode will not be off. * When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved GENERAL only when traffic program identification code has been received. Supply Voltage DC 12V. -
Page 6: Troubleshooting
b) During disc or USB mode: TROUBLE SHOOTING Press the button 1 briefly to play the first file in the CD or USB stick. Press button 2(+10) and button 3(-10) to move up and down 10 tracks at a time. Before using the check list please make all the connections first. -
Page 7: Remote Control Unit
Remote Control Unit About CD-R/CD-R/W discs: 1. POWER Use to turn the unit on or off. In addition to commercially-recorded audio CD's, this unit can play CD-R and CD-R/W discs. In come cases, particularly when recorded on older CD burners, some CD-R 2. -
Page 8: Installation
INSTALLATION Wiring connection diagram INSTALLATION METHOD This is an anti-theft installation method. The main unit has a METAL MOUNTING SLEEVE. Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to the requirements of this Instruction Manual, then install the metal RED R mounting sleeve into the car as per the diagram illustrated below.