Connecting To A Wi-Fi Network; Checking The Wi-Fi Network Status; Adding Wps Network - Zte T-Mobile Concord User Manual

Connecting to a Wi-Fi Network

1. Touch the Home Key >
The Wi-Fi network names and security settings (open or secured) that your phone
has detected are shown in the Wi-Fi networks section.
2. Touch a network to connect to it. If the network is secured, you need to enter a
password.
TIP: Touch the Menu Key > Scan in the Wi-Fi settings screen to scan for a Wi-Fi network
manually.

Checking the Wi-Fi Network Status

You can check the Wi-Fi network by looking at the
Or touch the access point that the phone is currently connected to in the Wi-Fi settings
screen. You can then check the network status from the pop-up window.

Adding WPS Network

Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to the
access points which supply WPS.
You can use one of the following methods to connect your phone to a wireless network
using WPS.
Method one: Push button (Recommended)
1. Touch the Home Key >
it on.
2. Touch Wi-Fi settings > Add WPS network.
3. Touch the WPS method drop-down menu, and then touch Push Button.
4. Touch Start. Your phone searches for the WPS network.
5. Press the WPS button on the wireless router and the access point will recognize your
phone and add it to the network.
> Settings > Wireless & networks > Wi-Fi settings.
> Settings > Wireless & networks and tick Wi-Fi to turn
44
icon in the status bar.