Front/Rear Panels - Behringer FEEDBACK DESTROYER FBQ1000 Manual

FEEDBACK
DESTROYER
FBQ1000
Front Panel
Rear Panel
IEC
power
socket
STATUS LEDs
display status DISPLAY shows
of 12 individual preset number
filters for each and parameter
channel values
LED METER displays FILTER MODE
output signal level, button accesses
in Total Bypass four filter
mode, displays modes: Off (OF),
input signal level Parametric EQ (PA),
Single-Shot (SI),
and Auto (AU)
MIDI OUT THRU/
IN connectors
FILTER SELECT
JOG WHEEL button enables
scrolls JOG WHEEL to ENGINE L and R
through presets select one of 12 buttons select
and adjusts filters per channel left and right
parameter values for editing audio channels
FINE button GAIN button
enables JOG WHEEL enables JOG
to fine-tune WHEEL to adjust
standard ISO amount of boost/
frequencies attenuation of
selected filter
(+16 dB to -48 dB)
OPERATING
LEVEL button
switches
between -10 dBV
and +4 dBu
Page 2 of 4
FREQUENCY BANDWIDTH
button enables button enables JOG
JOG WHEEL to select WHEEL to adjust
frequency edited in filter bandwidth
Parametric EQ mode (Q factor) of selected
STORE button IN/OUT button
enables JOG activates/
WHEEL to deactivates
scroll through Parametric
10 available EQ filters
preset slots
INPUT/OUTPUT jacks
accept balanced or
unbalanced XLR and
1/4" connections