Samsung BD-F7500 User Manual page 32

Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the player and each other
using a peer-to-peer network, without a wireless
router.
JNOTES t
_" SomeWi-FiDirect d evices maynotsupport t heAIIShare
function if connected viaWi-FiDirect,If this isthe case,
it is advisable to change the network connection method
between devices,
_. Bhetoothtransmissions c aninterfere withtheWi-Fi
Direct s ignal.Before youusetheWi-FiDirect f unction,
westronglyrecommend t hatyouturn off theBluetooth
function of anyactivemobile device.
1. Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2. In the Home screen, select Settings, and
then press the _ button.
3. Select Network, and then press the
button.
4. Select Wi-Fi Direct, and then press the
button.
The Wi-Fi Direct devices that you can
connect appear.
5. You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
Through the player using PBC.
Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the procedure on
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2. When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the _ button to accept.
3. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player UsingPBC
1. Select the Wi-Fi Direct device you want to
connect to this player, and then press the
button. The PBC/PIN pop up appears.
2. Select PBC, and then press the _ button.
The PBC pop-up appears.
3. Press the PBC button on the Wi-Fi Direct
device within 2 minutes.
4. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Usinga PIN
1. Select the Wi-Fi Direct device you want to
connect to this player, and then press the
button. The PBC/PIN pop up appears.
2. Select PiN, and then press the _ button.
The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
i NOTES t
_"Thecurrentwiredor wirelessnetwork connection will be
disconnected w henyou usetheWi-FiDirect f unction.
_. Textfiles,suchasfileswitha ,TXT or .DOC extension, will
notdisplay whenyou areusingtheWi-FiDirectfunction,
32 English