Individual Recording While Chasing; Timecode - Tascam DA-98 Owner's Manual

Section 10 – Operations related to timecode

10.7.11Individual recording while chasing

timecode

If slave DTRS units are chasing a master DTRS
unit, the default action is for the slaves' record sta-
tus to follow that of the master. If the slaves are
connected with TC as well as SYNC, and have TC
rather than ABS selected as the timing reference,
this default behavior can be overridden using the
function described here.
1) Go to menu group 4, move the cursor to
(timecode chase record), and
press :
ENTER
2) Use the and
UP DOWN
(individual recording is possible
while chasing to timecode) and
chasing units will follow the record status of the
first unit).
10-14 – 1.00 – 06/97
keys to select between
(all