Hardware Health Event Monitoring Screen - ASROCK H61 Pro BTC User Manual

3.5 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.
CPU Fan Setting
This allows you to set the CPU fan speed. Configuration options: [Full On]
and [Automatic Mode]. The default is value [Full On].
Chassis Fan Setting
This allows you to set the chassis fan speed. Configuration options: [Full
On] and [Automatic Mode]. The default is value [Full On].
Power Fan Setting
This allows you to set the power fan speed. Configuration options: [Full
On] and [Manual Mode]. The default is value [Full On].
Over Temperature Protection
Use this item to enable or disable Over Temperature Protection. The
default value is [Enabled].
Dehumidifier Function
Users may prevent motherboard damages due to dampness by enabling
"Dehumidifier Function". When enabling Dehumidifier Function, the com-
puter will power on automatically to dehumidify the system after entering
S4/S5 state.
Dehumidifier Period
This allows users to configure the period of time until the computer powers
on and enables "Dehumidifier" after entering S4/S5 state.
Dehumidifier Duration
This allows users to configure the duration of the dehumidifying process
before it returns to S4/S5 state.
Dehumidifier CPU Fan Setting
Use this setting to configure CPU fan speed while "Dehumidifier" is en-
abled.
50