Using Dvi (Same As Hdmi But Requires An Audio Connection) - Insignia NS-28E200NA14 User Manual

Using DVI (same as HDMI but requires an audio connection)

Note
You must use the HDMI1/ARC/DVI jack to connect a DVD or Blu-ray player
using DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
On your TV
HDMI cable 3.5mm audio
connector cable cable
connector
HDMI1/
PC/DVI
ARC/DVI
AUDIO IN
jack
jack
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the DVD or Blu-ray player.
3 Connect the other end of the cable to the HDMI1/ARC/DVI jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the
AUDIO OUT jacks on the DVD or Blu-ray player.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
5 Plug your TV's power cord into a power outlet, then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to select HDMI 1, then press ENTER.
20
Side of TV
HDMI-DVI adapter
Back of TV
www.insigniaproducts.com
NS-28E200NA14 Insignia 28" LED TV
HDMI cable with
DVD or Blu-ray
player
3.5mm audio
cable