Safety; General Safety; Rf Interference Issues; Vehicle Safety - Multitech MultiModem Cell MTCBA-E1 User Manual

Wireless modem
Hide thumbs Also See for MultiModem Cell MTCBA-E1:
Table of Contents

Advertisement

Safety

General Safety

The modem is designed for and intended to be used in fixed and mobile applications. "Fixed" means that the device is physically
secured at one location and is not able to be easily moved to another location. "Mobile" means that the device is designed to be
used in other than fixed locations.
Caution:
Maintain a separation distance of at least 20 cm (8 inches) between the transmitter's antenna
and the body of the user or nearby persons. The Modem is not designed for or intended to be used in
portable applications within 20 cm. (8 inches) of the body of the user.

RF Interference Issues

It is important to follow any special regulations regarding the use of radio equipment due in particular to the possibility of radio
frequency, RF, interference. Please follow the safety advice given below carefully.
Switch OFF your MultiModem when in an aircraft. The use of cellular telephones in an aircraft may endanger the
operation of the aircraft, disrupt the cellular network and is illegal. Failure to observe this instruction may lead to
suspension or denial of cellular telephone services to the offender, or legal action or both.
Switch OFF your MultiModem when around gasoline or diesel-fuel pumps and before filling your vehicle with fuel.
Switch OFF your MultiModem in hospitals and any other place where medical equipment may be in use.
Respect restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in
progress.
There may be a hazard associated with the operation of your MultiModem close to inadequately protected personal
medical devices such as hearing aids and pacemakers. Consult the manufacturers of the medical device to determine
if it is adequately protected.
Operation of your MultiModem close to other electronic equipment may also cause interference if the equipment is
inadequately protected. Observe any warning signs and manufacturers' recommendations.

Vehicle Safety

Do not use your MultiModem while driving.
Respect national regulations on the use of cellular telephones in vehicles. Road safety always comes first.
If incorrectly installed in a vehicle, the operation of MultiModem telephone could interfere with the correct functioning of
vehicle electronics. To avoid such problems, be sure that qualified personnel have performed the installation.
Verification of the protection of vehicle electronics should be part of the installation.
The use of an alert device to operate a vehicle's lights or horn on public roads is not permitted.

Maintenance of the Wireless MultiModem

Your wireless MultiModem is the product of advanced engineering, design, and craftsmanship and should be treated with care.
The suggestions below will help you to enjoy this product for many
Do not expose the MultiModem to any extreme environment where the temperature or humidity is high.
Do not attempt to disassemble the MultiModem. There are no user serviceable parts inside.
Do not expose the MultiModem to water, rain, or spilled beverages. It is not waterproof.
Do not abuse your MultiModem by dropping, knocking, or violently shaking it. Rough handling can damage it.
Do not place the MultiModem alongside computer discs, credit or travel cards, or other magnetic media. The
information contained on discs or cards may be affected by the phone.
The use of accessories not authorized by Multi-Tech or not compliant with Multi-Tech's accessory specifications may
invalidate the warranty of the MultiModem.
In the unlikely event of a fault in the MultiModem, contact Multi-Tech Technical Support.

Handling Precautions

All devices must be handled with certain precautions to avoid damage due to the accumulation of static charge. Although input
protection circuitry has been incorporated into the devices to minimize the effect of this static build up, proper precautions should
be taken to avoid exposure to electrostatic discharge during handling and mounting.
Multi-Tech Systems, Inc. MultiModem Cell User Guide
Chapter 1 – Product Description and Specifications
years.
7

Advertisement

Table of Contents
loading

Table of Contents