Friedrich MR09C1H Brochure & Specs page 27

SINGLE PACKAGE VERTICAL AIR CONDITIONERS
OPTIONAL ACCESSORIES
ARCHITECTURAL LOUVER
VPAL2 and VPSC2
Extruded aluminum grille that attaches
to the outdoor section of the wall plenum.
Takes in fresh air and returns condensed
air. VPSC2 can be ordered in custom
colors.
DIMENSIONS: 25 9/16" W x 31 1/16" H
WALL PLENUM
VPAWP1-8, VPAWP1-14
Two-part sleeve that telescopes in and out.
Sits inside the exterior wall penetration.
VPAWP1-8 telescopes from 5 1/2"–8"
VPAWP1-14 telescopes from 8"–14"
DIMENSIONS: 24 1/8" W x 30 3/8" H
CUTOUT DIMENSIONS: 24 5/8" W
x 30 7/8" H
FIRST COMPANY SLEEVE ADAPTER
VPASA1
Single piece, welded adapter allows retro-
fi t into existing First Company SPXR-series
single package vertical unit wall sleeve
and louver. Easy connection to Friedrich
chassis.
VPASA1
Typical
®
Vert-I-Pak
installation
58"
Field-supplied
Filter (25" x 20")
29"
VPRG4 Access Panel &
Return Air Filter Grille
(refer to local codes)
3" Clearance on all three
sides minimum for
service and installation
RETURN AIR GRILLE/
ACCESS PANEL
VPRG4
Hinged panel allows access to unit and
return air fi lter. A fi eld-supplied fi lter (25"
x 20") should be mounted on the inside
the grille. Panel can be mounted with re-
turn air openings high or low on the door
for optimum sound attenuation.
DIMENSIONS: 29" W x 58" H
CUTOUT DIMENSIONS: 27" W x 55 3/4" H
SINGLE STAGE THERMOSTAT
RT6
Single stage, wall-mounted digital ther-
mostat with two fan speeds and backlight
for control of Friedrich VERT-I-PAK.
WRT1
Wireless, single stage, wall-mounted
digital thermostat with two fan speeds
and backlight for control of Friedrich
VERT-I-PAK.
DRAIN PAN
VPDP1
For VEA/VHA24 models. May be installed
prior to chassis for easy installation/
removal.
Rigid Ductwork
Power
Disconnect
Optional field
installed drain pan
Optional Platform
Chassis is shipped
with vibration
isolators installed
Exterior Wall
Flexible Ductwork
VPAWP1-8/1-14 Wall Plenum
Plenum Divider
ACCESS DOOR OR PANEL TO ACCESS DOOR OR PAN
CLOSET CAN BE INSTA CLOSET CAN BE INSTALLED
FROM 3 SIDES FROM 3 SIDES
VPDP1 drain pan beneath
unit is required on all
VEA/VHA24 units. Drain pan
must be installed prior to
chassis installation
27