Switch Buttons
Switch has five buttons, all with multiple functions. The chart below describes the different
functions and how they are accessed.
For ease of explanation this manual will refer to the buttons by the names displayed here.
Button
Press
Up
Down
Power
Back
Enter
Power
Turning Switch On
1. Press and hold PowEr button for 2-3
seconds.
2. The first time you power Switch on
follow the on-screen instructions to
configure the settings and enter your
personal information.
Turning Switch Off
1. Press and hold PowEr button for 2-3
seconds.
Back
Enter
Page back through data screens and up
on menus.
Page forward through data screens and
down on menus.
Turn backlight on and off.
Go back or cancel a selection.
Start a new lap (activity mode).
Navigate forward or confirm a selection.
Start and stop an activity (activity mode).
Up
Down
Power
Press and Hold
Displays Quick Info screen.
Access Main Menu.
Power on and off.
Save your current location, advance to
next session (multisport).
Reset your current activity.
Turning the Backlight On / Off
Note that the backlight causes a severe
drain on the battery and will greatly shorten
the battery life for each charge. Switch will
automatically turn the backlight off at an
interval set in "Device Settings". (See Settings .)
1. Press the PowEr button. The backlight
will come on.
2. The backlight will go off automatically
unless the backlight is set to remain on. If
so, press the PowEr button to turn the
backlight off.
2