LG DLE3733S Owner's Manual page 10

Electric and gas dryer
Hide thumbs Also See for DLE3733S:
Table of Contents

Advertisement

Available languages

Available languages

READALL INSTRUCTIONS BEFORE USE
A WARNING
F0r y0ur safety, the information in this manual must be followed to minimize the risk of
fire or explosion,electric shock, or to prevent pr0perty damage, personal injury, 0r 10ss
0f life.
SAFETYINSTRUCTION FORCONNECTING ELECTRICITY
A
WARNING
To reduce the risk of fire, electric shock or injury to persons when using the appliance,
follow basic precautions, includingthe following :
• Do not, under any circumstances,
cut or
remove the ground
prong from the power
cord.
To prevent personal
injury or damage to the
dryer, the electrical
power cord must be
plugged into a properly
grounded
• For personal
safety, this dryer must be
properly
grounded.
Failure to do so can result in electrical
shock
or injury
• Refer to the installation
instructions
in
this manual for specific electrical
requirements
for your model.
Failure to follow these instructions
can
create electrical
shock and/or a fire hazard.
• This dryer must be plugged into a
properly
grounded
outlet.
Electrical
shock can result if the dryer is not
properly grounded.
• Have the wall outlet and circuit checked
by a qualified
electrician
to make sure
the outlet is properly
grounded.
This will prevent shock hazard and assure
stability during operating.
The dryer should always be plugged
into
its own individual
electrical
outlet which
has a voltage
rating that matches the
rating plate.
This provides the best performance
and also
prevents
overloading
house wiring circuits
which could cause a fire hazard from
overheated
wires.
• Never unplug your dryer by pulling on
the power cord. Always
grip plug firmly
and pull straight out from the outlet.
The power cord can be cut by any
movement
of the core, resulting
in electrical
shock.
• Repair or replace
immediately
all power
cords that have become frayed or
otherwise
damaged.
Do not use a cord
that shows cracks or abrasion
damage
along its length or at either end.
These power cord can melt, creating
electrical
shock and/or fire hazard.
• When installing
or moving the dryer, be
careful not to pinch, crush, or damage
the power cord.
This will prevent
injury and damage
to the
dryer from fire and electrical
shock.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents