Table of Contents
Advertisement
Using the electric starter f or more
than 5 seconds at a time will
overheat the starter motor and can
damage it.
Turning the ignition switch key to
the START position while the
engine is running can damage the
starter motor and f lywheel.
Also, as the engine warms up, the
throttle grip can be turned to the
SLOW position without stalling.
5.
Before getting under way, allow
the engine to warm up sufficiently
to ensure good performance.
Above 41°F (5°C), warm up the
engine for 2 or 3 minutes.
Below 41°F (5°C), warm up the
engine for at least 10 minutes at
2,000 rpm.
During the warm-up period, check
the oil pressure indicator (p.
overheat indicator (p.
28
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS
from p.
90
.
LRT and XRT Types
(remote control)
27
),
) and
29
).
For panel mount or top mount remote
control information, refer to the
instructions provided with the remote
control equipment.
Side-Mount Type
EMERGENCY STOP
SWITCH
SWITCH CLIP
1.
Put the emergency stop switch clip
in the emergency stop switch, and
attach the lanyard to your PFD
(Personal Flotation Device) or to
your wrist, as shown.
OPERATION
LANYARD
39
Advertisement
Table of Contents
