2.9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your
optical drive first. Then, the drivers compatible to your system can be auto-
detected and listed on the support CD driver page. Please follow the order
from top to bottom to install those required drivers. Therefore, the drivers
you install can work properly.
If you want to use RAID mode on SATA ports, please make a
copy of "Serial ATA For Floppy Disk" driver from the support
CD to your USB storage device first.
Browse and Install this driver during the installation of your
operating system, after installing the driver you may continue
to install the operating system.
32