Download Print this page

Bosch WAE20060UC/01 Manual page 6

Advertisement

- Always follow the fabric care instructions recommended by the clothing manufacturer.
- Do not use the washing machine if it has a worn power cord or loose plug. Contact an authorized
service agent.
- Make sure that all washer water connections have shut-off valves and are readily accessible. Close
the washing machine water shut-off valve(s) at the end of each wash day.
- Check the fill hose connections on a regular basis to ensure that they are tight and not leaking.
- Always read and follow the instructions of the manufacturer of the detergent(s), cleaning aid(s), fabric
softener(s) and static eliminator(s) which you are using. Heed all warnings and precautions.
- Store all laundry chemicals and aids in a cool dry place according to the manufacturers' instructions.
- To reduce the risk of poisoning or chemical burns, keep all cleaning products out of the reach of
children.
- Do not operate the washing machine if any guards, panels and!or fasteners except transport fixing
bolts have been removed.
- Do not operate the washing machine if parts are missing or broken.
- Do not bypass any safety devices.
- To avoid floor damage and mold growth, do not let spills or splashes cause standing water around
or under the appliance.
- Do not operate this washing machine until you are sure that:
a. the washing machine has been installed according to the INSTALLATION INSTRUCTIONS.
b. all water, drain, power and grounding connections are in compliance with all local regulations
and!or other applicable regulations and requirements.
- Failure to install, maintain and!or operate the washing machine according to the manufacturer's
instructions may result in injury and!or damage.
- Check the fill hose connections on a regular basis to ensure that they are tight and not leaking.
- Removing any panel, including the service panel inthe front can expose sharp edges and points,
electrical connections and hot surfaces.
- To avoid damage to the door, do not push against the door when moving the unit. Precautions
should be taken to avoid damage to the floor.
- The water connections should be made and tested before electrical power is applied to the machine.
Notes:
- The IMPORTANT SAFEGUARDS and WARNINGS indicated in this manual do not cover all possible
conditions which may occur. Common sense, caution and care must be exercised when installing,
maintaining or operating the washing machine.
- Always contact your dealer, distributor, service agent or the manufacturer about any problems or
conditions that you do not understand.
GROUNDING
INSTRUCTIONS
- This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least resistance for the electric current. This
appliance is equipped with a cord that has an equipment-grounding
conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
- Improper connection of the equipment grounding conductor can result in electric shock. Connect to
individual Branch Circuit. Check with a qualified technician or a licensed electrician if you are in doubt
as to whether the washer is properly grounded. DO NOT modify the plug provided with the appliance
- if it will not fit the outlet have a proper outlet installed by a qualified electrician.
- KEEP THESE
INSTRUCTIONS
FOR FUTURE
REFERENCE
In case of change of ownership, manual should be conveyed
with the washer.
SAVE THESE INSTRUCTIONS.
|
WARNING - to reduce the risk of fire, electric shock, or injury to persons, read the
Important
Safety instructions
before operating this appliance.
Also follow the separate installation
instructions.
Follow the safety instructions
on page 10,11 !

Advertisement

loading

This manual is also suitable for:

Wae20060au/01Wae20060uc/22Wae20060uc/23Wae20060uc/1890003473686