Service Information; Explanation Of Fault Codes; Adjusting Oven Temperature; To Adjust The Thermostat - Kenmore 30-inch electric wall ovens Owner's Manual

i i i iiiiiiii!iii!iiii!iiiii!ii!ii
Your appliance is equipped with self-diagnostic software
which continuously monitors the control to ensure safe and
proper operation. If the software detects a questionable
situation, a FAULT CODE (F plus a number) will appear in
the display, continuous beeps may sound and as a safety
precaution, the operation will be cancelled.
If a fault code appears in the display and continuous beeps
sound, press the CANCEL pad. Then, reprogram the
cooking operation. If the fault code reappears in the display,
call an authorized servicer. Do not use the oven until the
appliance has been serviced.
If the oven is heavily soiled, excessive smoke and flaring
may result in a fault code during a self-clean cycle. If this
occurs, press the CANCEL pad and allow the oven to cool
for an hour.
If you have carefully followed the recipe, reviewed the
baking tips in this manual and still feel cooking results do not
meet your expectations, you can adjust the oven
temperature, DO NOT ADJUST THE TEMPERATURE if
only one or two items are not baking properly.
If you think the oven should be hotter or cooler, you can
adjust it yourself. To decide how much to change the
thermostat, set the oven temperature 25°F higher or lower
than the temperature in your recipe, then bake. The results
of the "test" should give you an idea of how much to adjust
the thermostat.
To adjust the thermostat:
1. Press the OVEN TEMP pad.
2. Press the • pad until 550 ° is displayed.
3. Press and hold the OVEN TEMP pad for several
seconds. The display will show the ambient oven
temperature for a few seconds then 00 ° will appear in the
display.
• If 00 ° does not appear in the display, press the
CANCEL pad and begin again.
• If the oven temperature was previously adjusted, the
change will be displayed. For example, if the
temperature was reduced by 15 °, -15 ° will be
displayed.
4. Press the • or V pad to select the temperature change
desired.
• The oven temperature can be increased up to 35 ° or
reduced by as much as 35 ° (-35 °) in 5 ° increments.
- If you delay in selecting a temperature, the program will
automatically cancel and 00 ° will disappear. Begin
again if the program cancels.
5. Press the CANCEL pad and the time of day will reappear
in the display. The oven will now bake at the adjusted
temperature.
It is not necessary to readjust the oven temperature if
there is a power interruption. This adjustment will not
affect broil or clean temperatures.