Cities; Chart Info - Garmin H Owner's Manual

cGPSmapper Manual
CountryIdx#=countr
y_index
...
[END]

4.2.2.3 Cities

Although this section is obsolete, it is still supported.
[CITIES]
City#=ciy_name
RegionIdx#=region_
index
...
[END]

4.2.2.4 Chart Info

[CHART INFO]
Name=xxx
Number=xxx
Projection=xxx
Published=xxx
Scale=###
3
Unlikely, since each region normally is located in a single country.
4
Unlikely, since each city normally is located in a single region.
http://cgpsmapper.com/
The country_index represents the number in the
corresponding
Country#
The first # (CountryIdx) must always be one.
3
Subsequent # must be in ascending order.
If included, there must be at least 1 region per country. In
theory, the limit is 13,107.
E.g.: CountryIdx1=1, means that the current region is located
in country 1 (right side of the equals sign).
The statements above can be repeated as needed.
Section terminator.
Declares all cities used for indexing
Name used to identify the city #.
The first # must always be one. Subsequent # must be in
ascending order.
E.g.: City1=New York
80 characters maximum.
The region_index represents the number in the
corresponding
Region#
The first # (RegionIdx) must always be one. Subsequent
# must be in ascending order.
If included, there must be at least 1 city per Region. In
theory, the limit is 13,107.
E.g.: RegionIdx1=1, means that the current city is located in
Region 1 (right side of the equal sign).
The statements above can be repeated as needed.
Section terminator.
Declarations for marine charts, attached to the 'marine chart'
object - which is created automatically as well (similar to the
background object) - and also attached to the 'marine border'
line.
This section should only be present if in the
section, there is a definition
Chart Name (e.g. La Plata to Nueva Palmira).
Chart Code (e.g. Gb3561(a)).
Chart Projection (e.g. Mercator).
Place where the chart was published (e.g. United Kingdom).
Map scale (e.g. 1:100000).
statement.
statement.
[IMG ID]
Marine=Y
Map Project
4
15 of 100