Advertisement
Advertisement
Table of Contents
Related Manuals for DOD SR823
Summary of Contents for DOD SR823
- Page 1 SR Series Crossovers • SR 823 • SR 834 A Harman International Company...
-
Page 2: Safety Instructions
Warning For your protection, please read the following: Water and Moisture: Appliances should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.) Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. - Page 3 SR Crossover SR823 / SR834 NTRODUCTION The DOD SR834 is a stereo 3-way, mono 4-way crossover, and the SR823 is a stereo 2-way, mono 3-way crossover. These high-quality crossover networks are designed to extract maximum sound quality from your multi- amped sound system at a price working musicians can afford.
- Page 4 1 and 2 (for stereo operation) or to channel 1 (for mono operation). Connect the appropriate output jacks for stereo 3-way, mono 4- way operation (SR834 only), or stereo 2-way, mono 3-way (SR823). The rear panel is clearly marked for proper connection. Follow the top labels for stereo connection or the bottom labels for mono connection.
-
Page 5: Stereo Operation
(LED indicator off). When the ÷10 switch is engaged, the frequencies marked around the LOW/MID (LOW/HIGH for SR823) frequency control are divided by 10. In other words, if the LOW/MID (LOW/HIGH for SR823) frequency is set at 250Hz and the range switch is engaged, the actual crossover frequency is 25Hz. - Page 6 SR834: Channel 1 and Channel 2 high frequency outputs, Channel 1 and Channel 2 mid frequency outputs, and one summed low frequency output. SR823: Channels 1 and 2 high frequency outputs and one summed low frequency output. The setup procedure is the same as for the stereo mode, except that, instead of connecting both low frequency outputs, connect only the Low Frequency Sum output to the low frequency amplifier.
-
Page 7: Mono Operation
SR Crossover MONO OPERATION Depress the Stereo/Mono switch** (LED indicator lit). When operating the crossover in mono mode, the HIGH-MID/HIGH frequency control range is from 800Hz - 9kHz. The mono mode setup procedure is the same as for stereo mode, except that the bottom row of markings on the front and rear panels will be followed instead of the top row. - Page 8 SR Crossover SR823/834 PECIFICATIONS CONFIGURATIONS: Stereo 2-way, Mono 3-way Stereo 3-way, Mono 4-way. FILTERS: Filter Type: Linkwitz-Riley state-variable Crossover Slopes: 24dB per octave Accuracy: 14% CROSSOVER FREQUENCIES Stereo: LOW/MID: 180Hz to 2kHz or 18Hz to 200Hz (selectable switch on rear panel)
-
Page 9: Declaration Of Conformity
Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC as amended by directive 93/68/EEC. DOD Electronics Corporation President of DOD 8760 South Sandy Parkway Sandy, Utah 84070 European Contact: Your local DOD Sales and Service Office or DOD Electronics Corporation 8760 South Sandy Parkway Sandy, Utah 84070... -
Page 10: International Distribution
LECTRONICS ORPORATION 8760 S OUTH ANDY ARKWAY 84070 ANDY 801-566-8800 ELEPHONE 801-566-7005 NTERNATIONAL ISTRIBUTION 8760 S OUTH ANDY ARKWAY 84070 ANDY 801-568-7638 ELEPHONE 801-568-7642 IS A EGISTERED RADEMARK OF ARMAN USIC ROUP © 1999 DOD E LECTRONICS ORPORATION DOD 18-3700...