Table of Contents
Advertisement
The 310px is a dual voice-coil design. This allows great flexibility in system wiring, depending
on the number of woofers used and the capability of the amplifier. For the highest fidelity with
the a/d/s/ PXa, or other amplifier providing two channels of subwoofer output we recommend
the following connections:
Number
of woofers
1
Connect individual voice coils to individual amplifier channels.
2
Connect the two coils of each woofer in parallel and connect
each woofer to an amplifier channel
3
Connect the coils of each woofer in series, connect the three
woofer in parallel, and connect to bridged amplifier channels
4
Connect one coil from each of two woofer in series. Connect
the remaining coils of the same two woofers in series.
Connect the first and second coil pairs in parallel, and
connect to an individual amplifier channel. Repeat for the
second channel using the second two woofers.
Impedance
to amplifier
3 ohms
1.5 ohms
2 ohms
4 ohms
wiring
diagrams
5
Hide quick links:
Advertisement
Table of Contents
