Getting Started; Connecting To An Antenna/Cable Tv - HANNspree 9.6" Liquid Crystal Display Television DT02-10A1 User Manual

9

Getting Started

Connecting to an Antenna/Cable TV

1.
Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (VHF/UHF IN Jack) on the back of the TV.
2.
Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the Antenna socket or CATV cable.
ANT jack
(VHF/UHF IN jack)
Note
If you cannot receive channels after connecting an antenna or cable TV
line, try scanning for channels. See "Auto Program" on page 44.
20
S
S
Antenna/CATV
coaxial cable
Antenna
Antenna/CATV socket