Configuring My Boat - Garmin GPSMAP 4000 Series Owner's Manual

Gpsmap 4000 series

Hide thumbs Also See for GPSMAP 4000 Series:

Owner's manual (82 pages)

Supplement manual (24 pages)

Quick reference manual (2 pages)

Table Of Contents

Table of Contents

onfIGurInG the

nIt

Setting Navigation Alarms

To set a navigation alarm, from the Home screen, select

Anchor Drag—set an alarm to sound when you exceed a specified drift distance.

Arrival—set an alarm to sound when you are within a specified distance or time from a destination

waypoint.

Off Course—set an alarm to sound when you are off course by a specified distance.

Setting System Alarms

To set a system alarm, from the Home screen, select

Clock—set an alarm using the system (GPS) clock. The unit must be on for the clock alarm to work.

battery—set an alarm to sound when the battery reaches a user-determined low voltage.

GPS Accuracy—set an alarm to sound when the GPS location accuracy falls outside the user-

determined value.

Setting Sonar Alarms

To set a sonar alarm, from the Home screen, select

NOTE: You must have an optional sonar module (and a transducer connected to the sounder

module) wired via NMEA 0183 or connected to the Garmin Marine Network to receive sonar

information.

Shallow Water/Deep Water—set an alarm to sound when the depth is less than or greater than the

specified value.

Water Temp—set an alarm to sound when the transducer reports a temperature that is 2° F (1.1° C)

above or below the specified temperature.

Fish—set an alarm to sound when the unit detects a suspended target of the specified symbols.

Setting Weather Alarms

To set a weather alarm from the Home screen, select

NOTE: You must have a subscription to XM WX Weather and the optional GDL 30/30A module

connected to the Garmin Marine Network to view weather information. Refer to

information.